AGM Battery Distribution Block Compatible With PowerPole PP15-PP45 4-Output

Description

Distribution Block housing for Anderson Powerpole connectors, this fits the PP15-PP45 (15a-45a) #1327 housings.
Make a 7/8Ah battery into a portable power pack with fuse!
This allows using four pairs of connectors to make a distribution block that can be attached to the top of an AGM battery for a portable power source.  The output of the battery to the connectors is fused and all you need to make the fuse holder is two 1/4" female crimp terminals that you lay into the fuse holder position and install the cover, allowing the use of ATC automotive type fuses.  The slots in the fuse holder allows use of up to 12awg insulated wire.
The four positions have pin holes to keep them in place, can be pinned in place with half inch long 3/32" roll pins or just use pieces of 12awg solid copper wire to make pins to keep them in place.  The connectors can be daisy chained with wire, or use the PCB contacts to make a bus bar arrangement, that decision is up to you how to wire it, but there is many possibilities.  Once the box is installed onto the top of the battery, using double sided tape or whatever you choose, the battery terminals are enclosed and safe from shorts, making a fully enclosed and portable power source.
Revised... Thanks to some great feedback on these i have made some changes.  The fuseholder part has now been redesigned allowing for better engagement with the fuses due to some variation in the fuse contact lengths.  The pin holes for the connectors have been redesigned with a counterbore allowing you to easily pull the pins and remove the connectors if needed.  In the pictures you can see how i did it, i just put in a piece of 12awg bare copper wire and then snipped it with my flush cutters, the pin will sit just below the cover and can't fall out, but can be grabbed with a needle nose pliers and removed for future connector replacement if needed.
Whats included in the sale...
1 - Distribution box with lid
1 - Fuse holder cover
2 - screws for the fuse holder cover
4 - screws for the box lid
There is no connectors, fuses, or wire included.  Shown in the pictures for demonstration purposes and as a guide on how to assemble these only.
The default color i make these is Black, however many other colors are available!  If you have a special need or want for one in a different color just contact me for color availability.  I can also provide other colors not in stock with a slight lead time, usually 4-5 days, to obtain whatever color you desire.
Any Questions Just Ask!
73
A Note on any buyer issues...
For all my listings of fabricated items if you have any issues with them please contact me before leaving feedback!!  Any fitment problems or suggested changes are welcome!!
A Note on Feedback...
I do my best to make my customers happy!  If you have an issue with your purchase Contact Me!  If you have questions Contact Me!  Problems with the item you bought Contact Me!  There is no point in leaving useless negative feedback that does nothing to resolve the situation.
A Note on Shipping Costs...
I Ship next day on most purchases made between Sunday and Thursday, Friday purchases ship next business day, Monday, but sometimes
I
get them out early on Saturday but this is not guaranteed.  Due to Various World Issues, Shipping times can be considerably longer.  I have no control unfortunately over the longer times being experienced by USPS.  If you wish to pay significantly more for shipping
I
can offer UPS or FedEx, but contact me before making a purchase!